Jump to content

TrenchCoatGuy

Members
  • Content Count

    189
  • Joined

  • Last visited

  • Days Won

    2

About TrenchCoatGuy

  • Rank
    Lurker
  • Birthday 04/25/1989

Contact Methods

  • Website URL
    http://https://plus.google.com/101304936077311547529/posts

Profile Information

  • Gender
    Male
  • Location
    Blacksburg, VA, USA
  • Interests
    Chainmail, Archery, Programming, Engineering, Robotics, Woodworking.
  • Biography
    Yes, I do wear a trench coat. It is brown.
  • Location
    *knocks on screen*
  • Interests
    Chainmail, programming, and archery.
  • The year you started making chainmail
    Spring 2008
  1. TrenchCoatGuy

    The dragon scale tie.

    For the color variation, you will probably have more luck searching for dragonscale bracelets as more people have made them.
  2. TrenchCoatGuy

    Hanging an Inlay

    If you look closely at the weave Flat Byz 4in1 Tube, you will notice that the center is E4:1 and the outside sets up a byzantine connection. As it looks like you have about 100 rings across, you should be safe ringwise. You could then stagger the placement of the byz chains every 5 intervals or so. I wonder if "heavy fabric wall hangings" would give any further insight from google...
  3. TrenchCoatGuy

    Business logo inlay - scales or rings?

    I think the rule of thumb that if you want lettering legible, you want it about 8-10 pixels high. It can be optimized down to about 6 pixels in some cases, but legibility is difficult. As for modifying the image, I always suggest this tutorial.
  4. TrenchCoatGuy

    Business logo inlay - scales or rings?

    *beats everyone else with the response* You probably want to use zlosk's IGP program (if you are running windows). Its a "paint" program for rings. Select the weave (e4:1 or scales) and import your image. Make any minor modifications you want to get one that looks good. Keep in mind, one pixel in the image yields 1 ring in the weave. Scaling down is usually a must. You can also search things like "inlay" and "IGP" either on this forum or on MAIL to get some nice tutorials/tips.
  5. TrenchCoatGuy

    ring making question

    A number of reasons. First question would be, same metal? Different metals often have different springbacks. Same alloy and temper? Even seemingly the same metal can have different strength characteristics. Same type of cut? Saw cutting will remove more material than machine, causing the ring to be slightly smaller. Its usually a temper/alloy difference... however: Same winding method? If I recall from TRL's youtube videos, their ring shapers force the outer side of the ring for machine cut while they use a drill for saw cut (at least suggested with their vids).
  6. TrenchCoatGuy

    Chain Backpack or Messenger bag

    Very possible, as it has been done before. There has been a lot more done on purses that you can probably more readily search threads, which could have similar structure for a messenger bag.
  7. TrenchCoatGuy

    Help with planning super easy project

    Aspect ratio (in maille terms ID/WD [inner diameter/wire diameter]) It allows easy scaling of weaves.
  8. TrenchCoatGuy

    Help with planning super easy project

    20awg rings at an AR close to 3 and a good resolution image should get you a resulting pattern that would size about 1/3 a sheet of paper. 20awg at an AR around 4-5 would get you half a sheet of paper. 18swg around an ar of 3 would probably be around the full sheet of paper. If you plan on buying aluminum rings from TRL, I would suggest 20swg 3/32 rings (or 7/64 if you dont want it as dense). I have personally made some coasters from enameled copper 20awg 3/32 rings, which would be another option of material. As for sizing/modifying the image before tossing it into IGP, refer to these two tutorials for assistance. Keep in mind, you probably want to scale it down to around 50-80 pixels height. Results may vary.
  9. I get comments from relatives that I made pieces for, as they stumble upon different sellers. They are always amusing. The ones that really irk me are the new maille jewelry teaching books that are starting to appear... without flush closures... in silver.
  10. TrenchCoatGuy

    Minecraft anyone?

    Don't look em in the eye or they get angry. Unless of course you are wearing a pumpkin. They like pumkin people.
  11. TrenchCoatGuy

    IGP help.

    I decided to give it a short go and see why it wasn't working. A couple things I noticed: 1. The color IGP doesn't handle correctly is exact white. It crashes upon trying to read it. The simple fix is to change the color to a very light grey. 2. I'm not sure if IGP reads the color formatting that the file currently is. I didn't completely read the warning when I opened it in GIMP, but you should convert it to RGB. (If you use GIMP, Open the file, Top bar -> Image -> Mode -> select RGB). 3. Jpeg images sometimes arent handled as well (if at all), since they can have strange formatting things. You can attempt using a bmp or png. 4. Unless you have all of the greys between black and white, you probably want to apply a threshold to force two colors (Note, if you use GIMP's threshold, you need to redo the white-to-grey step). 5. It may be in your interest to also shrink down the image size even further, as right now the image produces a 228,000 ring inlay. (Note, again scaling the image should be done first, as you will have to redo the threshold step). You can easily scale to a 240x238 image without loosing too much detail. The image successfully opened for me after the first 3 steps (I used a png). Since it needs to draw quite a few rings it took a bit of time to actually draw the image.
  12. TrenchCoatGuy

    Weave for chainmail ball?

    http://www.mailleartisans.org/weaves/weavedisplay.php?key=671 I think I used the rings suggested there. I know some other people have also substituted in some rubber rings to make it a fancy flexible ball.
  13. TrenchCoatGuy

    Weave for chainmail ball?

    Go for a geometric figure if it is a desk item. I've made a celtic rose pentagonal tesselation and an hourglass dodecahedron skeleton.
  14. TrenchCoatGuy

    Minecraft anyone?

    I dug out a silverfish spawn from the enderportal. They spawn up to 3 at once (compared to 1), had them drop to near-death and let them gather for a couple hours. Threw one splash potion at them and went from level 1 to 100 once the lag from that much experience stabilized (If you've killed the dragon before they updated to have larger experience spheres you know what it would be like). Best way to track them down is using the enderpearls to find the enderportal (which always has a silverfish spawn). Otherwise, I would say its luck and/or cheating the game. I have heard of changing the texture pack to have stone be mostly transparent to simply look around in your dungeons.
  15. TrenchCoatGuy

    Minecraft anyone?

    Any of the wool blocks can be replaced with normal blocks (not sand, gravel, cactus, ect). The key point is pistons can only push 3 blocks. The rest of the trick is in the redstone circuit. My gate was made of brick on the outside and the dirt on the inside.
×