Jump to content

Arctic TRN

Members
  • Content Count

    328
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by Arctic TRN

  1. I have 4 patches of finished chainmaille made from TRL machine cut stainless steel 16g 5/16" (SS16516) to go. There are 3 that are 15 x 200 rings (9000 rings) and 1 that is 15 x 100 (1,500 rings). All the rings were cleaned and tumbled before assembly. If you are wanting to make a hauberk like the one shown on www.bladeturner.com, this is a quick boost as it more than half the rings that you will need to finish. Price is $18US per 1,000 plus shipping.
  2. Arctic TRN

    FS: Stainless Steel clad Aluminium Large Scales

    Alright no problem. I do have a supply of 10x10 diamond shaped sheets that are made from nickel plated steel scales. They are identical to the original TRL large scales. Some are made with split rings, otherwise 16g 5/16" stainless steel. Many loose ones as well. How many scales do you think your project will require?
  3. I have a large quantity of the old TRL discontinued stainless steel clad aluminium scales that I would like to get rid of. Many loose ones and a lot assembled into 10x10 diamond shaped patches using 16g 5/16" stainless steel rings. There is more than enough to make 1 or 2 full vests. I am only wanting the cost of supplies and shipping. PM me for details.
  4. Arctic TRN

    FS: Stainless Steel clad Aluminium Large Scales

    How about you sending me an email. You can reach me at scaleman@mts.net and we can go on from there.
  5. Arctic TRN

    Powder coated scales

    I tried powder scales with limited success. Instead contracted a local professional powder coater to do the job for me. They are awesome. This was several years ago. I had them coat virtually all the common TRL scales. The real key is prep and even coating of powder. I had some candy apple red and purple done on stainless clad aluminium and they are simply stunning.
  6. Send me a PM. Can't message you.
  7. Arctic TRN

    FS: Stainless Steel clad Aluminium Large Scales

    Did not get this PM
  8. Arctic TRN

    FS: Stainless Steel clad Aluminium Large Scales

    Yes, that is exactly what it is. Just on one surface though.
  9. Arctic TRN

    large scales combined with E4in1

    Thanks Rob. Perfect example.
  10. Arctic TRN

    large scales combined with E4in1

    It is actually very easy. Use the same size rings as you use for the scales. If you look at the weave pattern you can see it is actually Euro 4.1 with a missing ring (the pattern is really Japanese 4.1). Think of the scale as a ring. The sample patch in the previous post is a good example. If you could see the reverse side (*hint*) it would be very obvious how to proceed. Weaving the attached e4.1 at 90 degrees can be done but the results are not good. The resulting piece does not hang well. You can also easily attached Japanese 4.1 and 6.1 using the same sized rings joined with smaller rings.
  11. These were for trade or sale and are gone. Please feel free to remove this post. I am unable to.
  12. Arctic TRN

    Scale Maille Cape - any attempts made?

    Make it with small black plastic scales with stainless steel rings. I have several large pathces and it looks very cool. Not ridiculous. PM me.
  13. Arctic TRN

    Anodized Aluminum - technical info

    Actually I think I have noticed this variation come to light on a inlay that I used 16g 5/16" rings using the marvelous bright anodizing rings. In the bright dip anodizing process, is the wire coiled? Or is it coiled after the anodizing? If it was coiled after, there would be no ID variation. The AR would still vary though.
  14. Arctic TRN

    WTB old large stainless scale

    How many?
  15. Arctic TRN

    Stainless Steel - Black and Plain

    Do you have an ETA for bulk SS18316?
  16. Arctic TRN

    Go Jets Go!

    The cup is in site!
  17. Arctic TRN

    Looking for maillers to waeve 4in1 patches

    PM sent.
  18. Arctic TRN

    Square wire rings AR

    What is the AR for rings made from square wire? How do you determine it? I think the answer is not straightforward. When calculating, do you assume that the wire "diameter" is the wire thickness? Or do you assume it is the diagonal length (when wire is viewed in cross section)? Or is it weave dependant? I notice that TRL does not specify an AR for rings made from square wire.
  19. Arctic TRN

    WTB Mint Green 16ga 1/4", 18ga 3/16", & 18ga 5/32"

    I have a fair quantity of 16g 5/16" if you are interested. Some are pre-closed.
  20. Arctic TRN

    Gift Certificates

    Why is there a delay having gift certificates authorized when paying by credit card or PayPal? I can understand why they are not done while waiting for cheques to be cleared.
  21. Arctic TRN

    need advice for pennie chainmail

    If it is heavy, consider soldering the rings.
  22. Arctic TRN

    Good ring size for shirt?

    I would use 18g 3/16 stainless steel machine cut from TRL. The reason I say that is because I have several large sheets of it I want to get rid of....
  23. Arctic TRN

    FS: Scale Maile Vest, Mirrored Gold, Mens Medium Long

    That is very nice. I think you should be able to get much for than that for it though.
×